Loading ...
Loading ...
Loading ...
EN
12
Displays
DISPLAYS
VIEWFINDER
1 2 3 5 6 97 8 1210 114
1
Horizon
(Tilt along the longitudinal axis/transverse axis; displays are
provided as an example of tilting in a clockwise direction; other
directions are displayed similarly)
– max. ±0.5°
– 0.5-2.5°
– 2.5-5°
– 5-10°
– flashing ≥10°
2
Shutter speed
– manually set value at /
– automatically controlled value at /
– (high) overexposure at , , or due to flash
– (low) underexposure at , , or due to flash,
undercutting of measuring range
– Long-term exposure (B setting)
– Memory card full warning
3
Exposure mode
– Automatic program
– Aperture priority
– Shutter priority mode
– Manual settings for shutter speed and aperture
4
Aperture
– manually set value at /
– automatically controlled value at /
5
Flash display
– Continuously lit: Flash ready
– Flashing: Flash loading, flash not ready
6
Light balance
(Markings: 1⁄2EV increment each, last markings/digits flash at ≤
-3EV/≥ +3EV) to show
– manual exposure balance
– Deviation of the current measurement to the saved exposure
setting (with metering memory lock in the automatic exposure
modes , , )
– Exposure compensation
7
Flash display
Illuminated = shutter speed ≤ sync speed set
8
Focus displays
– only appears in manual mode or for manual AF override:
continuously lit if setting is too large
– in manual mode: continuously lit if the setting is correct
– for AFsAFs: continuously lit if the setting is correct; flashes if
no correct setting is possible
– for AFcAFc: continuously lit if the setting is correct; goes out
when focusing restarts
– only appears in manual mode or for manual AF override:
continuously lit if setting is too short
9 Exposure compensation/flash exposure compensation set
10
Exposure metering method
– Multi-field metering
– Center-weighted metering
– Spot metering
11
Picture counter
– Total remaining number of pictures
– External memory
– (flashing at 2Hz) = memory card full
– (flashing at 2Hz) = no memory card inserted
– Maximum number in a picture series (L 14)
– Error message
12
ISO sensitivity
– manual setting
– automatic setting
– HI 1 HI 1 (ISO3200)/HI 2HI 2 (ISO6400)/HI 3HI 3 (ISO12500)/HI 4HI 4
(ISO25000)/HI 5HI 5 (ISO50000) = currently set sensitivity
Note
The viewfinder LCD is always lit when the camera is switched on. The
light level automatically adjusts to ambient brightness for reasons of
legibility.
Loading ...
Loading ...
Loading ...