Loading ...
Loading ...
Loading ...
3. Add engine oil that meets our
specifications. See Capacities and
Specifications (page 524).
4. Reinstall the engine oil filler cap. Turn
it clockwise until you feel a strong
resistance.
Note: Do not add oil further than the
maximum mark. Oil levels above the
maximum mark may cause engine damage.
Note: Immediately soak up any oil spillage
with an absorbent cloth.
Resetting the Engine Oil Change
Reminder - Vehicles With: 4.2 Inch
Screen
1. Press the Menu button on the steering
wheel to enter the information display
main menu.
2. Select Truck Info.
3. Select Oil Life.
4. Select Reset Oil Life.
5. Press and hold the OK button until the
system reset confirmation appears.
Resetting the Engine Oil Change
Reminder - Vehicles With: 8 Inch
Screen/12.3 Inch Screen
Depending on your cluster, there are two
paths to reset the engine oil change
reminder.
Path 1
1. Press the Menu button on the steering
wheel to enter the information display
main menu.
2. Select Settings.
3. Select Vehicle Maintenance.
4. Select Oil Life.
5. Press and hold the OK button until the
system reset confirmation appears.
Path 2
1. Press the Menu button on the steering
wheel to enter the information display
main menu.
2. Select Truck Info.
3. Select Engine Information.
4. Press and hold the OK button until the
system reset confirmation appears.
Engine Oil Capacity and
Specification
For filling information, please refer to the
Capacities and Specifications section of
your owner's manual. See Engine Oil
Capacity and Specification (page 463).
CHECKING THE COOLANT
When the engine is cold, check the
concentration and level of the coolant at
the intervals listed in the scheduled
maintenance information. See Scheduled
Maintenance (page 602).
Note: Make sure that the coolant level is
between the minimum and maximum marks
on the coolant reservoir.
Note: Coolant expands when it is hot. The
level may extend beyond the MAX mark.
If the coolant level is at or below the
minimum mark, add prediluted coolant
immediately.
Maintain coolant concentration within
48% to 50%, which equates to a freeze
point between -29°F (-34°C) and -35°F
(-37°C). Coolant concentration should be
checked using a refractometer. We do not
recommend the use of hydrometers or
coolant test strips for measuring coolant
concentration.
463
F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202007, First-Printing
Maintenance
Loading ...
Loading ...
Loading ...