Loading ...
Loading ...
Loading ...
3. Fully insert the diesel exhaust fluid
pump nozzle.
E328783
4. Operate the diesel exhaust fluid pump
nozzle within the area shown.
Note: The pump nozzle shuts off when the
tank is full.
5. Slightly raise the diesel exhaust fluid
pump nozzle and then slowly remove
it.
6. Replace the diesel exhaust fluid tank
filler cap. Turn it clockwise until you
feel a strong resistance and it clicks.
Filling the Selective Catalytic
Reduction System Tank Using a
Portable Container
The following procedure applies to
Motorcraft diesel exhaust fluid or similar
fluid containers. Follow the
manufacturer's instructions.
1. Fully open the fuel filler door.
2. Remove the diesel exhaust fluid
container cap.
3. Place the spout on to the container and
tighten it until you feel a strong
resistance.
E328788
4. Remove the diesel exhaust fluid tank
filler cap.
Note: The diesel exhaust fluid tank has a
blue filler cap.
5. Insert the spout into the filler neck until
the seal on the spout fully seats.
6. Pour the fluid into the tank.
Note: The fluid stops flowing when the tank
is full.
7. Return the container to the vertical
position slightly below the diesel
exhaust fluid filler neck.
8. Allow any fluid remaining in the spout
to drain back into the container.
9. Remove the spout from the diesel
exhaust fluid filler neck.
10. Replace the diesel exhaust fluid tank
cap. Turn it clockwise until you feel
a strong resistance and it clicks.
11. Remove the spout from the diesel
exhaust fluid container and replace
the cap.
Note: If there is diesel exhaust fluid left in
the container retain it for later use. The
spout is reusable. Wash the spout with
clean water prior to storage. Do not use the
diesel exhaust fluid spout with any other
fluid.
248
F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202007, First-Printing
Selective Catalytic Reduction System - Diesel
Loading ...
Loading ...
Loading ...