Loading ...
Loading ...
Loading ...
Try Playing a Variety of Instrument Voices
PSR-I500 Owner’s Manual
23
Quick Guide
DSP is an abbreviation for Digital Signal Processor,
and provides effects that enhance the sound. DSP
effects are applied only to a specified target as
described below.
Parts to which DSP effects are applied
1
Press the [DSP] button to turn DSP on.
Although turning on DSP will select a DSP type
suitable for the current panel setting, you can
select a different DSP type as described in the
following steps.
2
Hold down the [DSP] button for longer
than a second to call up “DSP Type”
(Function 042).
After a few seconds, the current DSP type
appears.
3
Rotate the dial to select a DSP type.
For information about the available DSP types,
refer to the Effect Type List in the Data List.
4
Press [KNOB ASSING] button to select
b.
5
Press the [FUNCTION] button to select
the target.
6
Use the CATEGORY [<<] and [>>] buttons
to call up “Target” (Function 043).
After a few seconds, the current target (KEY-
BOARD or BACKING) appears.
7
Press the [+/YES] or [-/NO] button to switch
between KEYBOARD and BACKING.
When KEYBOARD is selected, the DSP affects
the Main Voice, Dual Voice or track 1 of a User
Song. When BACKING is selected, it affects the
Style, Riyaz or track A of a User Song.
8
Press the [DSP] button again to turn DSP
off.
Adding DSP Effects
target: KEYBOARD
• Main Voice
• Dual Voice
• Track 1 of a User Song
When selecting the target “KEYBOARD” for DSP
DSP
• ON/OFF
• Type
target: BACKING
• Style
• Riyaz
• Track A of a User Song
When selecting the target “BACKING” for DSP
Output
Output
Output
Output
target: KEYBOARD
• Main Voice
• Dual Voice
• Track 1 of a User Song
DSP
• ON/OFF
• Type
target: BACKING
• Style
• Riyaz
• Track A of a User Song
• This parameter is set in step 5.
Appears when
the DSP is on.
DSP Type
042
RotarySp
01
042
Current DSP type
Hold for longer
than a second.
Limitations when recording a Song
• DSP effects can be recorded only to Tracks 1 and
A.
• The DSP type and target cannot be changed
while recording.
• When recording to an existing User Song, if the
target to which the DSP effects are applied differs
from the recording tracks, DSP related setting
data (DSP target, type, parameter A/B) will not be
recorded or overwritten.
• The DSP effects may not be applied as expected
when a User Song is being played back. This is
because the DSP effects are affected by the data
recorded to the User Song.
Harmnum1
001
Current Target
Loading ...
Loading ...
Loading ...