Loading ...
Loading ...
Loading ...
DJI Goggles Racing Edition
User Manual
©
2018
DJI All Rights Reserved.
11
2. Power on the DJI OcuSync Air Unit and press the link button on the Air Unit with an appropriate
tool when the linking status indicator is solid green. The indicator will turn solid red when the Air
Unit is waiting for linking.
3. Power on the Goggles RE and swipe down on the touch panel with two fingers to enter the
shortcut menu, then select “Racing Drone (Digital) > Linking Settings > Advanced Linking >
Connect two sets of Goggles RE > Primary” and conrm. This Primary Goggles RE will be linked
with the DJI OcuSync Air System in a few seconds.
4. Press the link button on the Air Unit again. The indicator will turn solid red when the Air Unit is
waiting for linking.
5. Power on the other Goggles RE and swipe downward with two ngers on the touch panel to
enter the shortcut menu, select “Racing Drone (Digital) > Linking Settings > Advanced Linking >
Connect two sets of Goggles RE > Secondary” and conrm. This Secondary Goggles RE will be
linked with the DJI OcuSync Air System in a few seconds.
Goggles RE + Mavic Pro Remote Controller
：
1. Follow the steps 1 and 2 of “Basic Linking” above to complete the linking of Goggles RE and DJI
OcuSync Air System respectively.
2. Power on the Goggles RE and swipe down on the touch panel with two fingers to enter the
shortcut menu, select “Racing Drone (Digital) > Wireless Settings > Auto”, and set 2.4 GHz as
the operating frequency, since this is the only frequency that the Mavic Pro Remote Controller
supports.
3. Power on the DJI OcuSync Air Unit and press the link button on the Air Unit with an appropriate
tool when the linking status indicator is solid green. The indicator will turn solid red when the Air
Unit is waiting for linking.
4. Put on Goggles RE, select “Racing Drone (Digital) > Linking Settings > Advanced Linking >
Connect two sets of Goggles RE > Primary” and conrm. This Primary Goggles RE will be linked
with the DJI OcuSync Air System in a few seconds.
5. Press the link button on the Air Unit again. The indicator will turn solid red when the Air Unit is
waiting for linking.
6. Connect your mobile device to the Mavic Pro Remote Controller, launch the DJI GO
TM
4 app and
enter the camera view. Press , then select “Remote Controller Linking > Secondary Remote
Controller”. The Remote Controller will be linked with the DJI OcuSync Air System in a few
seconds.
You can only view video transmission on the mobile device linked to the Mavic Pro Remote
Controller. Upstream control signal transmission is not supported.
After familiarizing yourself with digital video transmission, you can connect the trainer port on a
third-party remote controller and the audio port on the Goggles RE with a trainer cable to transmit
the control signal to a racing drone. In addition, the PPM port of the DJI OcuSync Air Unit can be
connected to the gimbal actuator, enabling gimbal control through your head movements.
Loading ...
Loading ...
Loading ...