User Manual - Page 261

For 2018 ŠKODA KODIAQ.

Loading ...
Loading ...
Loading ...
A message on the screen informs about the storage of the tyre pressure val-
ues.
Note
When the warning light appears in the instrument cluster, the affected tyre
can be displayed on the infotainment system » Fig. 312.
Tyre pressure control system (RDK)
Introduction
The tyre pressure monitoring system (hereinafter referred to as "system")
monitors the tyre inflation pressure while driving by means of pressure sen-
sors on the wheels.
WARNING
Please take note of the general points relating to the use of assistance
systems » page 214, in section Introduction.
Having the correct tyre inflation pressure is always the driver's responsi-
bility. Tyre pressure should be checked regularly » page 282.
Note
After switching on the ignition, the last measured tyre pressure values are dis-
played. This display will be updated at the start of the journey.
Display and settings
Fig. 313 Example in the display of the instrument cluster/settings in In-
fotainment
Read and observe on page 259 first.
In the event of a loss of pressure in one of the tyres, an acoustic signal is heard,
the indicator light in the display of the instrument cluster illuminates and
the corresponding message » page 45 is displayed.
The display on the instrument cluster can also be displayed manually by press-
ing the button on the multifunction steering wheel →
vehicle
.
The setting is made in Infotainment via the menu

/
Vehicle status
as
well as with the function surfaces, by selecting the menu item Tyre pres-
sure monitoring system.
Display/screen display » Fig. 313
Actual tyre pressure
Target tyre pressure
System fault, system possibly not available in rear right tyre
Front left tyre pressure too low
Selection of the loading condition
Select loading condition
The tyre pressure must be adjusted according to the loading condition of the
vehicle.
In the menu item Tyre pressure monitoring system, tap on the function sur-
face
E
» Fig. 313.
or: Choose the option
Tyres
Loading:
.
Select the tyre types
When changing the tyre type, the air pressure must be adapted to the new
tyres.
In the menu item
Tyre pressure monitoring system, select the option
Tyres
Tyre type:
.
A
B
C
D
E
259
Assist systems
Loading ...
Loading ...
Loading ...