Loading ...
Loading ...
Loading ...
For the activation, deactivation and correct functioning of the system, the
following basic conditions are required.
The driver's door is closed.
The engine is running (or has been switched off automatically by the
START-STOP system).
On vehicles with automatic transmission the selector lever is not in mode
N (in this mode, the system is not available).
Stopping and starting
When stopping the system prevents the vehicle from rolling away. The warn-
ing light illuminates in the instrument cluster. The brake pedal can be re-
leased.
The vehicle's brakes are released at the moment of stating off. The warning
light
in the instrument cluster goes out.
Should the vehicle start to roll away when starting on a downhill slope, step on
the accelerator or switch on the parking brake.
If the vehicle is secured by the system and the driver's door is opened or the
ignition is turned off, the vehicle is secured by the parking brake to prevent un-
wanted movement.
In this case, the indicator light turns off
in the instrument cluster and the
warning light
illuminates.
Activation/deactivation
The system is activated/deactivated by means of the
» Fig. 254 button.
When the system is activated, the symbol
illuminates.
After switching off and switching on the ignition, the system remains either
activated or deactivated depending on the last setting.
WARNING
The increased stopping and starting comfort brought by the system must
not tempt you to take any safety risks.
■
The system is not able to stop the vehicle under all circumstances, such
as on icy or otherwise slippery ground, or on gradients.
■
When stopping and parking always make sure that the vehicle is correctly
secured » page 208, Parking.
CAUTION
In some washing systems it is necessary that the vehicle can roll freely. There-
fore, the system must be deactivated before driving through a car wash.
Note
The system is able to secure the vehicle for about 10 minutes, after which the
vehicle will be automatically secured by the parking brake.
Parking
Read and observe on page 206 first.
When stopping and parking, look for a place with a suitable surface » .
Only carry out the activities while parking in the specified order.
›
Bring the vehicle to a stop and depress the brake pedal.
›
Engage the parking brake.
›
For vehicles with automatic transmission, place the selector lever in the P
position.
›
Switch off the engine.
›
For vehicles with manual gearbox, engage 1st gear or reverse gear R.
›
Release the brake pedal.
If the parking brake is turned on while on a steep slope, the following message
may be displayed in the instrument cluster. Search for a car park with less of
an inclination.
WARNING
■
The exhaust system components can become very hot. Therefore, never
stop the vehicle at places where the underside of your vehicle can come in-
to contact with flammable materials such as dry grass, undergrowth,
leaves, spilled fuel or such like. - Risk of fire and serious injury can occur!
■
When leaving the vehicle, never leave people who could, for example, lock
the vehicle or release the brake, unattended in the vehicle - risk of accident
and injury!
208
Driving
Loading ...
Loading ...
Loading ...