Loading ...
Loading ...
Loading ...
Fig. 19 Fasten/unfasten seat belt in the third row
Read and observe on page 22 first.
Before fastening
›
Adjust the headrest properly (does not apply to seats with integrated headr-
ests).
›
Adjust the seat (applies for the front seats and the second row).
›
Adjust the belt height (applies to the front seats).
Fasten - in front and in the second row
›
Slowly pull the belt over the chest and pelvis.
›
Insert the lock tongue into the belt buckle for the seat » Fig. 18 -
until it
audibly clicks into place.
›
Pull on the belt to check that it has engaged correctly in the lock.
Unfasten - in front and in the second row
›
Hold the lock tongue and press the red button in the belt buckle » Fig. 18 -
.
The lock tongue pops out.
›
Guide the belt back by hand so that the seat belt does not twist and the seat
belt strap rolls up fully.
Fasten - in the third row of seats
›
Slowly pull down the belt on the lock tongue
A
» Fig. 19 in the arrow direc-
tion
1
.
›
Insert the lock tongue
A
into the lock in the direction of arrow
2
until it
clicks.
›
Pull the belt on the lock tongue
B
slowly across the chest and pelvis in the
direction of arrow
3
.
›
Insert the lock tongue
B
in the other lock in the direction of arrow
4
stuck,
until it clicks.
›
Pull on the belt to check that it has engaged correctly in the lock.
Unfasten - in the third row of seats
›
Grip the lock tongue
A
» Fig. 19and press the red button in the lock tongue,
the lock tongue pops out.
›
Grip the lock tongue
B
and press the red button in the seat belt buckle; the
lock tongue pops out.
›
Guide the belt back by hand so that the seat belt does not twist and the seat
belt strap rolls up fully.
WARNING
The slot of the belt tongue must not be blocked, otherwise the belt tongue
will not lock in place properly.
Inertia reel and belt tensioners
Inertia reels
Each seat belt is equipped with an inertia reel.
When pulling slowly on the seat belt, the belt can move freely. When pulling
sharply on the seat belt, the movement is locked by the inertia reel. The belts
also lock when full braking, when the car accelerates, when driving downhill
and when cornering.
WARNING
If the seat belt does not lock when pulling sharply on it, have the inertia reel
inspected immediately by a specialist garage.
Belt tensioners
The safety for the driver, front passenger and the two passengers on the outer
seats of the second row of seats who are wearing seat belts is enhanced by
the belt tensioners fitted to the inertia reels of the front seats and the outer
seats of the second row of seats.
If there is a collision with a certain severity the seat belts are tightened by the
belt tensioner so that unwanted body motion is prevented.
Belt tensioners are not activated in the event of a roll-over, minor collisions or
in accidents in which no major forces are produced.
24
Safety
Loading ...
Loading ...
Loading ...