Loading ...
Loading ...
Loading ...
Activation/deactivation
Fig. 275
Button for activation / deactiva-
tion
Read and observe and on page 226 first.
Activation
The system is activated by selecting reverse gear or pressing the symbol
button» Fig. 275.
During activation, an alarm sounds and the
symbol lights up in the button.
The mode for traverse parking is displayed on the screen.
Deactivation
The system is deactivated when you press button
, switch off the ignition,
put the selector lever in position P, or when you drive forwards at a speed of
more than 15 km/h (the
symbol in the button goes out).
Functional surfaces
Fig. 276
Functional surfaces
Read and observe and on page 226 first.
It is possible to adjust the parking and manoeuvring mode by means of the
function surfaces.
Functional surfaces » Fig. 276
Turns off the display of the area behind the vehicle
Mode - traverse parking
Mode - parallel parking
Mode - driving up to a trailer / distance monitoring
Mode - monitor the area behind the vehicle (wide view)
Screen settings - brightness, contrast, colour
Parking aid (thumbnail display)
Switch thumbnail display on/off
Switch to full screen display
Orientation lines and lane
Fig. 277
Orientation and lane lines
Read and observe and on page 226 first.
In the modes for transverse and parallel parking guidance, orientation lines for
the assessment of distance and lane lines are displayed on the screen.
Screen display » Fig. 277
The distance is about 40 cm (safety distance limit).
The distance is about 100 cm.
The distance is about 200 cm.
The lane lines terminate approximately 300 cm behind the vehicle.
The distance may vary slightly depending on the load of the vehicle and the
road inclination.
The distance between the side lines corresponds approximately to the vehicle
width including mirrors.
A
B
C
D
E
F
G
A
B
C
D
227
Assist systems
Loading ...
Loading ...
Loading ...