Loading ...
Loading ...
Loading ...
Building in the appliance
95
Fitting the anti-tip device in a build-
ing-in niche deeper than 24" (610
mm)
The guarantee that the compressor
plate hooks into the anti-tip device in a
deeper building-in niche, a wooden
beam must be secured to bridge the
gap between the back of the appliance
and the wall.
The wooden beam must be se-
curely fixed to the floor! Select screw
lengths according to the thickness of
the wooden beam.
Match the wooden beam to the depth
of the gap between the back of the
appliance and the wall.
Use the number of screws appropri-
ate to the housing width to ensure
that the wooden beam is securely
fixed.
Select screw lengths according to the
thickness of the wooden beam.
For sideways sloping floors
Make sure that the anti-tip device is
secured horizontally even with a slop-
ing floor. Place spacers underneath if
necessary.
Loading ...
Loading ...
Loading ...