Loading ...
Loading ...
Loading ...
Selecting additional settings
34
The last selected setting lights up in the
display.
By touching the sensors for setting
the temperature in the freezer section
you can alter the brightness of the
temperature display between and
.
Touch the Super sensor again to save
the setting.
Touch the on and off sensor for the
freezer section to exit Settings mode.
Changing the door seal heater
setting
If condensation builds up on the door
seal for the refrigerator section doors,
this can be eliminated by selecting the
highest door seal heater setting ( ).
The factory default is (middle set-
ting).
Condensation will not usually form at
an average ambient temperature and
humidity.
If condensation should form on the
door seal at higher air humidity and a
lower ambient temperature, set the
door seal heater temperature to the
highest level.
Touch the On/Off sensor for the Su-
perFreeze function for approx. 5sec-
onds.
The indicator light in the right-hand
side of the display will light up at this
time and after approx. 5seconds S will
flash in the bottom (freezer section)
temperature display. MENU will light up
in the display. You are now in Settings
mode.
Loading ...
Loading ...
Loading ...