Loading ...
Loading ...
Loading ...
Stow n’ Go Seating
There are tether strap anchorages located be-
hind the second row seating positions and the
third row center seating position. The tether
anchorages are located on the back of the seat,
near the floor.
LATCH-compatible child restraint systems will
be equipped with a rigid bar or a flexible strap
on each side. Each will have a hook or connector
to attach to the lower anchorage and a way to
tighten the connection to the anchorage.
Forward-facing child restraints and some rear -
facing child restraints will also be equipped
with a tether strap. The tether strap will have a
hook at the end to attach to the top tether
anchorage and a way to tighten the strap after it
is attached to the anchorage.
Center Seat LATCH
If a child restraint installed in the center posi-
tion blocks the seat belt webbing or buckle for
the outboard position, do not use that outboard
position. If a child seat in the center position
blocks the outboard LATCH anchors or seat belt,
do not install a child seat in that outboard
position.
WARNING!
Never use the same lower anchorage to at-
tach more than one child restraint. Please
refer to “To Install A LATCH-Compatible
Child Restraint” for typical installation in-
structions.
Always follow the directions of the child re-
straint manufacturer when installing your child
restraint. Not all child restraint systems will be
installed as described here.
Tether Strap Anchorages (Third Row
60/40 Anchorage Shown)
Tether Strap Anchorages (Second Row
Captains Chair Anchorage Shown)
SAFETY
96
Loading ...
Loading ...
Loading ...