Loading ...
Loading ...
Loading ...
NOTE:
The programmable features of the ParkView
Rear Backup Camera can be selected through
the touchscreen. Refer to your Uconnect Own-
er’s Manual Supplement for further information.
When displayed, static grid lines will illustrate
the width of the vehicle while a dashed center -
line will indicate the center of the vehicle to
assist with aligning to a hitch/receiver.
The static grid lines will show separate zones
that will help indicate the distance to the rear of
the vehicle. The following table shows the ap-
proximate distances for each zone:
Zone Distance To The Rear Of The Vehicle
Red 0-1ft(0-30cm)
Yellow 1ft-3ft(30cm-1m)
Green 3 ft or greater (1 m or greater)
WARNING!
Drivers must be careful when backing up
even when using the ParkView Rear Back Up
Camera. Always check carefully behind your
vehicle, and be sure to check for pedestrians,
animals, other vehicles, obstructions, or
blind spots before backing up. You are re-
sponsible for the safety of your surroundings
and must continue to pay attention while
backing up. Failure to do so can result in
serious injury or death.
CAUTION!
• To avoid vehicle damage, ParkView should
only be used as a parking aid. The
ParkView camera is unable to view every
obstacle or object in your drive path.
• To avoid vehicle damage, the vehicle must
be driven slowly when using ParkView to be
able to stop in time when an obstacle is
seen. It is recommended that the driver
look frequently over his/her shoulder when
using ParkView.
NOTE:
If snow , ice, mud, or any foreign substance
builds up on the camera lens, clean the lens,
rinse with water , and dry with a soft cloth. Do not
cover the lens.
115
Loading ...
Loading ...
Loading ...