Loading ...
Loading ...
Loading ...
Base Cargo Center Console
Pull the W inch Cover assembly plug and re-
tainer clip (if equipped) to access the winch
drive nut.
Spare Tire Removal
The spare tire is stowed inside a protective cover
located under the center of the vehicle between
the front doors by means of a cable winch
mechanism. The “spare tire drive” nut is lo-
cated on the floor , under a plastic cap at the
front of the floor console or under front super
console forward bin liner.
Spare Tire Removal Instructions
The spare tire is located under the vehicle be-
neath the center console area.
1. Assemble the spare tire tools into a T-handle
and place the square end over the spare tire
winch drive nut.
2. Rotate the nut to the left until the winch
mechanism stops turning freely. This will
allow enough slack in the cable to allow you
to pull the spare tire out from underneath the
vehicle.
CAUTION!
The winch mechanism is designed for use
with the winch T-handle only. Use of an air
wrench or other power tools is not recom-
mended and can damage the winch.
3. To remove the compact spare tire/cover as-
sembly, assemble the winch T-handle exten-
sions to form a spare tire hook, and pull the
spare tire out from under the vehicle.
Winch Cover Location
Spare Tire Carrier
IN CASE OF EMERGENCY
128
Loading ...
Loading ...
Loading ...