Loading ...
Loading ...
Loading ...
The instrument cluster display can be used to
program the following Personal Settings. Push
the right arrow button until Personal Settings
displays, then push the down arrow button to
scroll through the settings. Push the right arrow
button to change the setting.
• Select Language • Key-Off
Power Delay
• Nav-Turn By Turn • Illuminated
Approach
• Auto Lock Doors • Hill Start Assist
• Auto Unlock
Doors
• Flashers With
Sliding Door
• Remote Unlock
Sequence
• Calibrate
Compass
• Remote Start
Comfort Sys.
• Compass
V ariance
• Horn With
Remote Lock
• Park Assist -
If Equipped
• Flash Lamps
With Lock
• Automatic
High Beams -
If Equipped
• Headlamp
Off Delay
• Headlamps
With Wipers
Key Fob Programmable Features
The following features may also be programmed
by using the key fob or the ignition and driver's
door lock switch.
NOTE:
Pushing the lock button while you are inside the
vehicle will activate the vehicle security alarm.
Opening a door with the vehicle security alarm
activated will cause the alarm to sound. Push
the unlock button to deactivate the vehicle
security alarm.
Unlock On First Press
To unlock either the driver's side, or all doors, on
the first press of the unlock button:
1. Push and hold the lock button for at least
four seconds, but no longer than 10 sec-
onds. Then, push and hold the unlock but-
ton while still holding the lock button.
2. Release both buttons at the same time.
Auto Unlock Doors On Exit
To have all of the vehicle doors unlock when any
door is opened:
1. Enter your vehicle and close all the doors,
and fasten your seat belt.
2. Cycle the ignition switch between the OFF
and ON position four times, ending in the
OFF position (do not start the engine).
3. Push the power door unlock switch to unlock
the doors. A single chime will indicate that
programming is complete.
Sound Horn With Lock
To turn the horn chirp on or off when the doors
are locked:
1. Push the lock button for at least four sec-
onds, but no longer than 10 seconds. Then,
push the PANIC button while still holding
the lock button.
2. Release both buttons at the same time.
GETTING TO KNOW YOUR INSTRUMENT PANEL
50
Loading ...
Loading ...
Loading ...