Loading ...
Loading ...
Loading ...
• If you install the compact spare tire in place of
a road tire that has a pressure below the
low-pressure warning limit, upon the next ig-
nition switch cycle, a chime will sound, a
“LOW TIRE PRESSURE” message will be
displayed and the TPMS Warning Light will
turn on.
• After driving for up to 20 minutes above
15 mph (24 km/h), the TPMS W arning Light
will flash on and off for 75 seconds and then
remain on solid.
• For each subsequent ignition switch cycle, a
chime will sound, the TPMS Warning Light
will flash on and off for 75 seconds and then
remain on solid.
• Once you repair or replace the original road
tire and reinstall it on the vehicle in place of
the compact spare tire, the TPMS will auto-
matically update, and the TPMS Warning
Light will turn off as long as no tire pressure is
below the low-pressure warning limit in any of
the four active road tires.
TPMS Deactivation — If Equipped
The TPMS can be deactivated if replacing all
four wheel and tire assemblies (road tires) with
wheel and tire assemblies that do not have
TPMS Sensors, such as when installing winter
wheel and tire assemblies on your vehicle.
To deactivate the TPMS, first, replace all four
wheel and tire assemblies (road tires) with tires
not equipped with Tire Pressure Monitoring
(TPM) Sensors. Then, drive the vehicle for
20 minutes above 15 mph (24 km/h). The
TPMS will chime, the TPMS Warning Light will
flash on and off for 75 seconds and then remain
on.
Beginning with the next ignition cycle, the
TPMS will no longer chime or flash the TPMS
W arning Light.
To reactivate the TPMS, replace all four wheel
and tire assemblies (road tires) with tires
equipped with TPM sensors. Then, drive the
vehicle for up to 20 minutes above 15 mph
(24 km/h). The TPMS will chime, the TPMS
W arning Light will flash on and off for 75 sec-
onds and then turn off.
General Information
The following regulatory statement applies to all
radio frequency (RF) devices equipped in this
vehicle:
This device complies with Part 15 of the FCC
Rules and with Industry Canada license-exempt
RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause harmful interfer -
ence, and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
NOTE:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’ s authority to operate the
equipment.
SAFETY
64
Loading ...
Loading ...
Loading ...