Loading ...
Loading ...
Loading ...
5. Push and hold the programmed HomeLink
button and observe the indicator light.
NOTE:
• If the indicator light stays on constantly,
programming is complete and the garage
door/device should activate when the
HomeLink button is pushed.
• To program the two remaining HomeLink
buttons, repeat each step for each re-
maining button. DO NOT erase the
channels.
If you unplugged the garage door opener/device
for programming, plug it back in at this time.
Using HomeLink
To operate, push and release the programmed
HomeLink button. Activation will now occur for
the programmed device (i.e. garage door
opener, gate operator , security system, entry
door lock, home/office lighting, etc.) The hand-
held transmitter of the device may also be used
at any time.
Security
It is advised to erase all channels before you sell
or turn in your vehicle.
To do this, push and hold the two outside but-
tons for 20 seconds until the red indicator
flashes.
NOTE:
All channels will be erased. Individual channels
cannot be erased.
The HomeLink Universal Transceiver is disabled
when the V ehicle Security Alarm is active.
Troubleshooting Tips
If you are having trouble programming
HomeLink, here are some of the most common
solutions:
• Replace the battery in the Garage Door
Opener hand-held transmitter.
• Push the LEARN button on the Garage Door
Opener to complete the training for a Rolling
Code.
• Did you unplug the device for programming
and remember to plug it back in?
If you have any problems, or require assistance,
please call toll-free 1-800-355-3515 or , on the
Internet at HomeLink.com for information or
assistance.
WARNING!
• Vehicle exhaust contains carbon monox-
ide, a dangerous gas. Do not run your
vehicle in the garage while programming
the transceiver . Exhaust gas can cause
serious injury or death.
• Y our motorized door or gate will open and
close while you are programming the uni-
versal transceiver . Do not program the
transceiver if people, pets or other objects
are in the path of the door or gate. Only use
this transceiver with a garage door opener
that has a “stop and reverse” feature as
required by Federal safety standards. This
includes most garage door opener models
manufactured after 1982. Do not use a
garage door opener without these safety
features. Call toll-free
1-800-355-3515 or, on the Internet at
HomeLink.com for safety information or
assistance.
43
Loading ...
Loading ...
Loading ...