Loading ...
Loading ...
Loading ...
b
efore plugging in
●
Make sure your electricity supply is the same as the one
shown on the underside of your appliance.
●
This appliance conforms to EC directive 2004/108/EC on
E
lectromagnetic Compatibility and EC regulation no.
1935/2004 of 27/10/2004 on materials intended for contact
with food.
b
efore using for the first time
1
Remove the plastic blade covers from the knife blade. Take
care the blades are very sharp. These covers should
b
e discarded as they are to protect the blade during
m
anufacture and transit only.
2 Wash the parts see ‘care & cleaning’
key
processor
1
power unit
2
detachable drive shaft
3
Trïtan™ bowl
4
Trïtan™ lid
5
wide feed tube
6
pushers
7
safety interlocks
8
cord storage (at back)
9
power on light
bk
auto button
bl
speed/pulse control
weighing function (Type FPM91)
bm
kg/lb button
bn
display screen
bo
on/zero button
bp
weighing tray
thermoresist blender
bq
filler cap
br
lid
bs
goblet
bt
sealing ring
ck
blade unit
cl
filler cap vents
A - standard attachments
cm
knife blade
cn
dough tool
co
dual whisk
cp
folding tool
cq
max capacity disc
cr
4mm slicing disc
cs
2mm slicing disc
ct
4mm grating disc
dk
2mm grating disc
dl
attachment storage box
B - optional attachments
N
ot all the attachments listed below will be included with your
food processor model. Attachments are dependent upon the
m
odel variant. For more information or to order additional
a
ttachments refer to the “service and customer care” section.
dm
extra fine grater disc (if supplied)
dn
f
ine Julienne disc (if supplied)
do
decorative slicing disc (if supplied)
dp
French fry disc (if supplied)
dq
m
ini bowl and blade (if supplied)
dr
compact chopper/grinder (if supplied)
ds
citrus juicer (if supplied)
dt
m
etal juicer extractor (if supplied)
to use your food processor
1 Fit the detachable drive shaft onto the power unit
1
– push
down lightly to ensure the drive shaft is fully engaged.
2 Then fit the bowl to the power unit. Place the handle
towards the back on the right hand side and turn clockwise
2
until it locks.
3 Fit an attachment over the bowl drive shaft.
●
Always fit the bowl and attachment onto the processor
before adding ingredients.
4 Fit the lid
3
- ensuring the top of the drive shaft/tool locates
into the centre of the lid.
5 Fit the pushers to the feed tube – turn the small pusher
clockwise to lock in position
4
.
●
The processor will not operate if the bowl, lid or
wide feed tube pusher are not fitted correctly
into the interlocks. Check that the feed tube and
bowl handle are situated to the right hand side.
6 Plug in. The Power On light will come on and flash until the
bowl and lid are fitted correctly. Select one of the following
options: -
Auto Button – the light will come on when the Auto Button is
pressed and the optimum speed for the attachment will be
automatically selected.
Speed Control – manually select the required speed (refer to
the recommended speed chart).
Pulse – use the pulse (P) for short bursts. The pulse will
operate for as long as the control is held in position.
7 At the end of processing turn the speed control to the ‘O’ off
position or if using the Auto press the button and the light
will go out.
●
The Power On light will flash if either the lid,
bowl or wide feed tube are not fitted.
●
The Power On and Auto lights will flash if the
Auto is selected but the interlocks are not
engaged.
●
The Auto Button will not operate if a speed is
selected on the speed control.
●
Always switch off and unplug before removing the
lid.
important
●
Your processor is not suitable for crushing or grinding coffee
beans, or converting granulated sugar to caster sugar.
7
Loading ...
Loading ...
Loading ...