Loading ...
Loading ...
Loading ...
Acc ess
48
3008_en_Chap02_ouvertures_ed01-2015
Remote control problem
Following disconnection of the vehicle battery,
replacement of the remote control battery or in
the event of a remote control fault you can no
longer unlock, lock or locate your vehicle.
F First of all, use the key in the lock to unlock
or lock your vehicle.
F Then, reinitialise the remote control.
Changing the battery
Battery ref.: CR1620 / 3 volts.
Reinitialisation
F Switch off the ignition.
F Turn the key to position 2 (Ignition on).
F Press the closed padlock immediately for a
few seconds.
F Switch off the ignition and remove the key
from the ignition switch.
The remote control is fully operational again.
If the battery is flat, you are informed
by illumination of this warning lamp,
an audible signal and a message.
If the problem persists, contact a
PEUGEOT dealer as soon as possible.
F Unclip the casing using a coin at the notch.
F Slide the flat battery out of its location.
F Slide the new battery into its location
observing the original direction.
F Clip the casing.
F Reinitialise the remote control.
Loading ...
Loading ...
Loading ...