Loading ...
Loading ...
Loading ...
Practical information
234
3008_en_Chap10_infos-pratiques_ed01-2015
Towbar with quickly detachable towball
Fitting
F Below the rear bumper, unclip and remove
the protective cover on the carrier.
F Before fitting the towball, check that the
points of contact, indicated by the arrows,
are clean.
Use a soft clean cloth.
F Ensure that the towball is fully engaged.
The two pins must be in contact with
the cut-outs in the carrier and the
trigger B must have returned to the
"locked" position.
F Install and clip in place the protective
cover, by rotating it to the left.
F On the towball, press and hold control A.
F Release the locking mechanism by
pressing the trigger B.
F Put the end of the towball into the carrier,
located below the bumper, as far as it will go.
No tools are required to install or remove the towball on this genuine towbar system.
F Connect the trailer plug to the 13-way
socket provided, located next to the carrier.
F Make the trailer safe by attaching its safety
cable to the eye provided for this purpose,
located on the carrier.
Loading ...
Loading ...
Loading ...