Loading ...
Loading ...
Loading ...
Practical information
210
3008_en_Chap10_infos-pratiques_ed01-2015
Tyre under-ination detection
The space-saver type or steel spare
wheel does not have a sensor.
The punctured wheel must be repaired
by a PEUGEOT dealer or a qualified
workshop.
Removing a wheel
F Remove the bolt cover from each of the
bolts using the tool 7 (depending on
equipment).
F Fit the security socket 3 on the
wheelbrace 5 to slacken the security bolt
(if your vehicle has them).
F Slacken the other bolts using the
wheelbrace 5 only.
Parking the vehicle
Immobilise the vehicle where it does not
block traffic: the ground must be level,
stable and not slippery.
Apply the parking brake unless it has
been programmed to automatic mode.
Switch off the ignition.
With a manual gearbox, engage first
gear to block the wheels.
With an electronic gearbox, place the
lever in position R to block the wheels.
With an automatic gearbox, place the
lever in position P to block the wheels.
Check that the braking warning lamp
and the P warning lamp in the parking
brake control lever come on.
If necessary, place a chock under the
wheel diagonally opposite the wheel to
be changed.
The occupants must get out of the
vehicle and wait where they are safe.
Never go underneath a vehicle
supported by a jack; use an axle stand.
F Put the carrier back in place in the centre
of the wheel and clip it in place*.
F Put the polystyrene storage box back in
place*.
Wheel with wheel trim
When removing the wheel, first
remove the wheel trim using the
wheelbrace 5 by pulling at the valve
cut-out.
When refitting the wheel, refit the
wheel trim by placing its cut-out at the
valve, and press round its edge with the
palm of your hand.
Do not use:
- the jack for any purpose other than
lifting the vehicle,
- any jack other than the one
supplied by the manufacturer.
Loading ...
Loading ...
Loading ...