2016 3008 User Manual

Loading ...

279

3008_en_Chap12b_RT6-2-8_ed01-2015

USING THE TELEPHONE

Select "Connect" and conrm.

The system offers to connect the

telephone:

- in "Hands-free mode" (telephone

only),

- in "Audio" mode (streaming: playing

music les on the telephone),

- or "All" (for selection of both

modes).

Select "OK" and conrm.

Then accept automatic connection on the telephone to allow the

telephone to reconnect automatically every time the vehicle is

started.

The ability of the system to connect in only one mode depends on

the telephone. The two modes may both connect by default.

The "Hands-free mode" should be used in preference if

"Streaming" is not desired.

The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone

manual and with your network provider for details of the services available to you.

Depending on the type of telephone, the system will ask you to

accept or not the transfer of your contacts.

On return to the vehicle, the last telephone connected

automatically reconnects, within around 30 seconds after

switching on the ignition (Bluetooth activated and visible).

To modify the automatic connection mode, remove the pairing

and pair the telephone again with the desired mode.

Enter a minimum 4 gure code in the telephone

and conrm.

Enter the same code in the system,

select "OK" and conrm.

Select the name of the desired

peripheral from the list of devices

detected then conrm.

Loading ...

User Manual - Page 281