Loading ...
Loading ...
Loading ...
69
43" 1080p 60Hz LED Chromecast built-in TV
www.tv.toshiba.com
3 Highlight Channel Tuning, then press OK.
4 Highlight Auto Tuning, then press OK. Press OK
again to start the scan. Your TV scans for available
channels. The scan may take several minutes.
5 When the scan is complete, press EXIT to close the
menu. Your TV tunes to the first scanned channel.
Manually adding channels to the channel list
Channels with weak signals may not be added to the
channel list when you scan for channels. You can
manually add a channel to the channel list if you
know the channel number.
1 Press MENU, press
S
or
T
to highlight
Installation, then press OK.
2 Highlight Channel Tuning, then press OK.
3 Highlight Manual Tuning, then press OK.
4 Use the number buttons on the virtual remote
control to enter the channel number, then press
OK. See Virtual Remote control on page 19.
OR
Press
W
or
X
to select previous or next channel,
then press OK.
5 Press OK to start manual tuning.
6 Press EXIT to close the menu.
Notes
• If you have created a PIN, press
W
or
X
on the number bar at the bottom of
the screen to select a number, then
press OK. Repeat this step to enter the
other three numbers in your PIN. For
more information, see Setting a new
PIN on page 71. The channel scan
starts after you enter your PIN.
• You can press EXIT to stop the auto
channel search, but you will need to
run the auto channel search again to
create a channel list.
Loading ...
Loading ...
Loading ...