Loading ...
Loading ...
Loading ...
Page Title
8
Getting Started
6
Remove & Install Anti-Block Shield
Remove: Grip lid and press firmly against side of anti-block
shield (pressing towards side of lid and up) until it pops off
the prongs underneath.
Anti-block shield must be installed before use and
cleaned frequently.
Install: Place anti-block shield over prongs and press down
until it snaps into position.
Anti-block shield prevents food particles from coming
up through the steam release pipe, assisting with
pressure regulation.
7
Remove & Install Steam Release Handle
Remove: Pull steam release handle up and off steam
release pipe.
Steam release handle must be installed before use,
and cleaned frequently.
Install: Place steam release handle on steam release pipe.
Press down. Fits loosely when installed properly, but will
remain in place when the lid is turned over.
Remove Install
8
Install Condensation Collector
Install: On back of cooker base, align grooves on condensation
collector over tabs and push condensation collector into place.
The condensation collector accumulates excess water and
should be installed before cooking. Must be emptied after use.
Remove: Pull condensation collector away from cooker base.
Do not pull down on condensation collector.
9
Secure Power Cord
Secure detachable power cord to base power socket.
Connect to a 120V power source. Ensure connection is tight.
To disconnect, press Cancel. Remove plug from power source,
then if applicable, remove detachable power cord from base
power socket.
Loading ...
Loading ...
Loading ...