Loading ...
Loading ...
Loading ...
Function
28
Presentation timer Function
1. Press the TIMER button of remote control.
2. Press the ∧, ∨ button to select Time alarm or Time keeper item.
3. Press the ＜, ＞ button to select the desired preset time.
4. The timer starts to operate if you select specific time.
• Time alarm function : If you select a specific time, it is displayed in minute units. After 1 minute, the remaining time is
displayed at the bottom right of the screen, and then disappears after 5 seconds. When the remaining time is dis-
played, other OSD windows are closed. When the set time is reached, ‘0 minute’ flickers 10 times at 1 second intervals,
and then disappears.
• Time keeper function : If you select a specific time, it continues to be displayed in minute(‘) and second(“) units. Even
though other OSD windows appear, the remaining time is displayed again after the windows are closed. When the set
time is reached. 0’ 00” flickers 10 times at 1 second intervals, and then disappears.
5. If the set time disappears because of the use of other menus, press the TIMER button on a remote to display
the set time again.
• The Time alarm function and the Time keeper function cannot be used at the same time.
• The Time alarm function can be set from 5 to 60 minutes at 5 minute intervals (Off, 5, 10, 15, 20, ......,55, 60 minutes).
• The Time keeper function can be set from 1 to 10 minutes at 1 minute intervals, and from 10 to 60 minutes at
5 minute intervals (Off, 1, 2, 3, 4, .............., 8, 9, 10, 15, 20, 25, .............., 55, 60 minutes).
• Press the BACK button to exit the menu screen.
Time Alarm
Time Keeper
Off
Off
Close
Loading ...
Loading ...
Loading ...