Loading ...
Loading ...
Loading ...
Function
25
RGB Config. Function
RGB Config.
Auto Config.
Position
Resolution ꔃ
Size
Phase
Reset
ꔐ 1024 x 768
1280 x 768
1360 x 768
ꔂMove ꕉPrev.
1. Press the MENU button. Then, move to SCREEN with the
∧, ∨, ＜, ＞ buttons and press the ◉OK button.
2. Press the ∧, ∨ buttons to move to RGB Config. and press
the ◉OK button.
3. Move to a desired item with the ∧, ∨ buttons and then
press the ＞ button.
4. Press the ∧, ∨, ＜, ＞ button to adjust the screen condi-
tion as you want and then press the ◉OK button.
• Resolution can be chosen between 768 resolution (1024x768/1280x768/1360x768, 60Hz) and 1050
resolution (1400x1050/1600x1050, 60Hz).
• Press the BACK button to exit the menu screen.
1. Press the STILL button on the remote control.
* You can freeze the moving image.
2. To exit STILL, press any button.
* The STILL function will release automatically after approximately 10 minutes.
Using the Still Function
< Moving Image >
< Still Image >
Using Digital Zoom Function
* This function is available only in RGB input mode. The Zoom -/+and Position values return to their defaults when
you change the SOURCE or input signal,or turn the power off.
Adjusting the Zoom
1. Press the ZOOM button on the remote control.
2. Press the ∧, ∨ button to select Zoom item.
3. Press the ＜, ＞ button to adjust Zoom to your choice.
• You can adjust Zoom -/+ in 5%increments from 100% to 250%.
• Press the BACK button to exit the menu screen.
Adjusting the Position
1. Press the ZOOM button on the remote control.
2. Press the ∧, ∨ button to select Position item.
3. Press the ◉OK button. When the window below appears at the bottom right corner of the screen,
press the ∧, ∨, ＜, ＞ to adjust the position. When the arrow turns black, maximum adjustment has been
reached and no further adjustment can be made.
• Position is activated only when Zoom is set to more
• than 105%. Press the BACK button to exit the menu screen.
Loading ...
Loading ...
Loading ...