Loading ...
Loading ...
Loading ...
42 English
Operating the oven
Operating the oven
Press the START/SET pad.
The oven will automatically light and
start preheating. The display will show
a blinking “•” along with the default
or selected temperature, Bake, and
the bake element icon, until the oven
reaches that temperature.
When the oven reaches the desired
temperature, it will beep 6 times. The
oven will start cooking for the set
amount of time, and the remaining
cooking time will be displayed.
To see the time of day, press and hold
the Clock pad. When the Clock pad is
released, the display will go back to
the remaining cooking time. When the
cooking time has elapsed, the oven will
automatically shut off and the display
will show the time of day.
To change a programmed baking temperature, press the Bake pad, enter the new
baking temperature, and press the START/SET pad. If the oven temperature is
above the new setting, the oven will beep 6 times, then show the new setting. The
oven will complete cooking at the new temperature.
To change a programmed cooking time, press the Cooking Time pad, enter the
new cooking time, and then press the START/SET pad. The oven will continue
cooking for the remaining new set time.
NOTE
Place food in the oven after preheating if the recipe calls for it. Preheating is
important for good baking results. After the oven has reached the desired cooking
temperature, it will beep 6 times.
3. Press the number pads to enter the
desired cooking temperature
(for example, 3, 7, 5).
The selected cooking temperature will
blink on the display.
4. Press the Cooking Time pad.
The display will show -
hr
--min.
(hr, min characters are not displayed on
the NX58H5600S*/NX58J5600S*)
5. Press the number pads to enter the
desired cooking time.
The display will show the selected
time, and the Start indicator will blink.
You can set the time to any duration
between 1 minute and 9 hours and 99
minutes.
NX58H5 Series_AA_DG68-00526A-10_EN+MES+CFR (WEB).indb 42 1/30/2018 10:23:40 AM
Loading ...
Loading ...
Loading ...