Loading ...
Loading ...
Loading ...
The essentials
●
Do not consult the messages on the in-
strument panel screen when driving.
Management of indications on the
display
Fig. 34 Windscreen wipers lever: control but-
t
ons.
Calling up options
●
Switch the ignition on.
●
If a message or vehicle symbol is displayed,
pr
ess OK/RESET (
›
›
›
Fig. 34
A
).
●
Press the top or bottom part of the rocker
s
wit
ch
›
››
Fig. 34
B
until the desired option
appears.
Multifunction display (MFI)
The multifunction display (MFD) has two au-
tomatic memories: 1 - P
artial memory and 2
- Total memory. The selected memory will
be shown in the lower right-hand corner of
the display.
With the ignition switched on, and memo-
ry 1 or 2 displayed, briefly press OK to
change from one memory to another.
Trip memo-
ry (for a sin-
gl
e jour-
ney).
The memory stores the values for the
journey and the consumption from the
moment the ignition is swit
ched on un-
til it is switched off again.
If the journey is broken for more than 2
hours, the memory is automatically
erased. If the journey is continued in
less than 2 hours after the ignition is
switched off, the new data is added to
the data already stored in the memo-
ry.
Total mem-
ory (f
or all
journeys).
The memory stores the values of any
number of journeys, until it counts a
total of 19 hours and 59 minut
es of
driving, or 1999.9 km or miles of driv-
ing, depending on the type of instru-
ment panel fitted. On reaching either
of these limits, the memory is auto-
matically erased and starts to count
from 0 again.
Possible displays
Menu Function
Time
Current time in hours (h) and mi-
nutes (min).
Travelling
time
This indicates the hours (h) and mi-
nutes (min) since the ignition was
switched on.
Current
fuel con-
sumption
The current fuel consumption dis-
play operat
es throughout the jour-
ney, in l/100 km; with the engine
running and the vehicle stopped, in
l/hour.
Average
fuel con-
sumption
After turning on the ignition, aver-
age fuel consumption in li-
tres/100 km will be displayed aft
er
travelling about 100 metres. Oth-
erwise horizontal lines are dis-
played. The value shown is upda-
ted approximately every 5 sec-
onds.
Operating
range
Approximate distance in km that
can still be travell
ed with the fuel
remaining in the tank, assuming
the same style of driving is main-
tained. This is calculated using the
current fuel consumption.
Distance
covered
Distance travelled, after ignition is
switched on, in km.
»
25
Loading ...
Loading ...
Loading ...