Loading ...
Loading ...
Loading ...
Lights and visibility
“Coming home” and “Leaving
home” function (guidance lights)
The “Coming Home” and “Leaving Home”
function lights up the vehicle
’s immediate
proximity when getting into and out of it in the
dark.
The “Coming home” function is switched on
manually. However, the “Leaving home” func-
tion is automatically controlled by a rain and
light sensor.
Activating the “Coming Home” function
●
Switch the ignition off.
●
Activates the headlight flasher for approx. 1
second
›››
page 23.
When the driver door is opened, the “Coming
Home” lighting comes on. The delay in
switching off the headlights is counted from
when the last door or rear lid of the vehicle is
closed.
Deactivating the “Coming Home” function
●
It is automatically deactivated once the
time set for the light switch-off delay has
elapsed.
●
OR: it is automatically deactivated if, 30
seconds after the function has been activa-
ted, any vehicle door or the rear lid is still
open.
●
OR: rotate the light switch to position .
●
OR: switch on the ignition.
Activating the “Leaving Home” function
●
Unlock the vehicle (the light switch must be
at the position and the rain and light sen-
sor must detect darkness).
Deactivating the “Leaving Home” function
●
It is automatically deactivated once the
light switch-off delay time has elapsed.
●
OR: lock the vehicle.
●
OR: rotate the light switch to position .
●
OR: switch on the ignition.
Turn signal and main beam lever
Read the additional information carefully
›
›
›
page 23
Convenience turn signals
For the convenience turn signals, move the
lever as far as possible upwards or down-
wards and release the lever. The turn signal
will flash 3 times.
The convenience indicators can be deactiva-
ted at a Specialised workshop.
WARNING
Improper or lack of use of the turn signals,
or forgetting t
o deactivate them can con-
fuse other road users. This could result in a
serious accident.
●
Always give warning when you are going
to change lane
, overtake or when turning,
activating the turn signal in good time.
●
As soon as you have finished changing
lane, overtaking or turning, switch the turn
signal off.
WARNING
Incorrect use of the headlights may cause
accidents and serious injury, as the main
beam may distr
act or dazzle other driv
ers.
Note
●
If the convenience turn signal
s are oper-
ating (three flashes) and the other conven-
ience turn signals are switched on, the ac-
tive part stops flashing and only flashes
once in the new part selected.
●
The turn signal only works when the igni-
tion is switched on. The hazard warning
lights also work when the ignition is switch-
ed off
›››
page 70.
●
If any of both turn signals fails, the warn-
ing lamp will start flashing twice faster
than normal.
●
The main beam headlights can only be
switched on if the dipped beam headlights
are already on.
105
Loading ...
Loading ...
Loading ...