Loading ...
Loading ...
Loading ...
Operation
●
The highest possibl
e heating po
w
er will on-
ly be reached and ice removed from the win-
dows as quickly as possible when the coolant
is at its operating temperature.
Recommended settings for the heating
and fresh air system and the manual air
conditioning
●
Switch off the air recirculation.
●
Set fan speed or .
●
Turn the temperature control to the inter-
mediate position.
●
Open and direct all the air outlets in the
dash panel.
●
Turn the air distribution control to the re-
quired position.
●
Manual air conditioning: press the but-
ton in the control panel to switch on the cool-
ing. The air is dehumidified in cooling mode.
Recommended Climatronic settings
●
Press the
button in the control panel.
●
Set the temperature to +22°C (+72°F).
●
Open and direct the air outlets in the dash
panel.
Maximum cooling po
w
er or heating po
wer
in the case of Climatronic
When driving, the maximum cooling power or
heating power can be adjusted by pressing
the
1
or
2
›
›
›
Fig. 142 button repeatedly.
The temperature is not regulated.
●
Maximum cooling potency: set the temper-
ature below +16°C (+60°F). The display then
shows LO.
●
Maximum heating potency: set the temper-
ature above +29°C (+84°F). The display then
shows HI.
Dust and pollen filter
The dust and pollen filter should be changed
regularly in order to maintain air conditioner
performance.
If the vehicle is used frequently in areas
where the outside air is highly polluted, it may
be necessary to change the filter before the
next scheduled service.
Water under the vehicle
If the humidity and temperature outside the
vehicle are high, condensation can drip off
the evaporator in the cooling system and
form a small pool underneath the vehicle.
This is normal and does not indicate a leak!
132
Loading ...
Loading ...
Loading ...