Loading ...
Loading ...
Loading ...
Driver assistance systems
●
Replace the windscr
een if it is scratched,
cracked or chipped by stones in the laser
sensor area. Only use a windscreen author-
ised by SEAT. Carrying out repairs is not
permitted (e.g. in the case of damage suf-
fered in an impact from a stone).
●
When replacing the windscreen wipers,
only use windscreen wipers authorised by
SEAT.
●
Do not paint the laser sensor area on the
windscreen or cover it with adhesives or
other materials.
Function
Fig. 171
In the lower part of the centre console:
butt
on f
or the cit
y safety assist function.
Switching on and off the City Safety Assist
function
●
Press the
›
›
›
Fig. 171 button on the centre
console.
When the City Safety Assist function is
switched on, the control lamp lights up
on the dash panel within the operational
range, i.e. for speeds between 5-30 km/h
(3-19 mph).
Switch off the City Safety Assist function in
the following situations
Switching off the City Safety Assist function is
recommended in the following situations
›››
:
●
While the vehicle is being towed.
●
If the vehicle has been taken to an auto-
matic car w
ash.
●
If the v
ehicl
e is above a test bed.
●
If the laser sensor is faulty.
●
After the laser sensor has been involved in a
collision.
●
When driving off road (overhanging
branches).
●
If objects are protruding above the bonnet,
e.g. a load carried on the roof that significant-
ly protrudes over the front.
●
If the windscreen is damaged in the laser
sensor area.
WARNING
Failure to switch off the City Safety Assist
function in the above sit
uations may result
in accidents and serious injury.
●
Switch off the Cit
y Safety Assist function
in critical situations.
177
Loading ...
Loading ...
Loading ...