Loading ...
Loading ...
Loading ...
33
BEFORE YOU CALL
Surface burners do not ignite. Be sure range is properly plugged in and ignitor sparks when knob is turned to the
LITE position.
Surface burner flame is too high
or surface burner flame is
orange.
Gas pressure may be too high. If using LP make sure the range has been converted
for the use of LP Gas.
Appliance is not level. Be sure floor is level, strong, and stable enough to adequately support range.If floor is
sagging or sloping, contact a carpenter to correct the situation.
Poor installation. Place oven rack in center of oven. Place a level on the oven rack.
Adjust leveling legs at base of appliance until the rack is level.
Kitchen cabinet alignment may make range appear not level. Be sure cabinets are
square and have sufficient room for appliance clearance.
Cannot move appliance easily.
Appliance must be accessible for
service.
Cabinets not square or are built in too tightly. Contact builder or installer to make
appliance accessible.
Carpet interferes with appliance. Provide sufficient space so appliance can be lifted
over carpet.
Oven does not operate. Make sure power cord is plugged properly into outlet. Electrical power outage. Check
house lights to be sure. Call your local electric company for service outage informa-
tion.Service wiring is not complete. (See warranty on back cover). Make sure clock is
set properly.
Loading ...
Loading ...
Loading ...