Loading ...
Loading ...
Loading ...
EVE613SA, EVE616BA, EVE623SA, EVE633SA 25
Preparing the appliance
1. Please remove all stickers, leaflets and boxes from the
door and from the floor of the oven before operation.
2. Please wipe out the oven interior prior to operation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the oven
is completely dry.
3. Do not line the oven with foil. It will damage
the enamel.
Setting the time
The time of day must be set before the appliance
can operate.
After the appliance has been electrically connected the
display will cycle through the welcome screen, then ‘Set
Clock’ will illuminate under the clock display and the Hour
digits will flash.
1. Use the timer
+ and – to set the hour portion of the
current time (including AM/PM).
2. Press OK when the hours are set correctly. The
Minute digits will flash.
3. Use the timer
+ and – to set the minutes portion of
the current time.
4. Press OK when the minutes are set correctly. You can
turn the off the oven or it will do so after 8 seconds.
Once the time has been entered, the clock advances
minute by minute.
Note: The clock has a 12 hour display and will
remember the time for 3 days without power.
IMPORTANT!
New appliances can have a smell during first use.
It is recommended to ‘run in’ the oven before you
cook for the first time. Operate the oven, empty, at
a temperature of 180°C for approximately 2 hours
Please ensure the room is well ventilated during
this process.
BEFORE USING THE APPLIANCE
Installing your oven accessories
•Catalytic liners
The oven will arrive with a catalytic fan baffle and top panel
already fitted. Optional side panels are also supplied and
may be fitted before installing the side racks. The sole
purpose of the side panels is to make cleaning the oven
easier. Omitting them will have no effect on the cooking
performance of the oven. They can be fitted at any time
by removing the side racks. The catalytic liners supplied
attach to the left and right sides of the oven. Please note
that there is a different version for each side. They are
marked ‘LH’ or ‘RH’
1. Position the first liner as per the diagram. The black,
shiny side of the liner should be facing the oven wall
with the hooks pointing down. Note that the diagram
shows the left hand liner. The right hand side will be a
mirror image of this.
2. Line the hooks up with the slots provided in the oven
wall, push them in and then allow the liner to slide
down to its final position. All four hooks MUST be
engaged in the slots.
3. The access hole for the side racks should be visible
when the liner is correctly positioned – see diagram.
The access hole for the side racks should be visible when
the liner is correctly positioned – see diagram.
Note: If you have purchased an EVE623SA OR
EVE633SA you will have additional catalytic liners
for the extra oven cavity.
Loading ...
Loading ...
Loading ...