Loading ...
Loading ...
Loading ...
Frequently asked questions
95
Problem Possible cause and solution
Fault 406-408 Water inlet fault.
One of these numbers will appear in the display if the flow
pr
essur
e is too low and the program will be cancelled.
T
he flow pressure at the water intake point is too low
(see "T
echnical data"). Contact Miele Service for advice.
Fault 412-414 Water inlet fault.
One of these numbers will appear in the display if the flow
pr
essu
re is too high and the program will be cancelled.
The flow pr
essur
e at the water intake point is too high
(see "Technical data"). Contact Miele Service for advice.
Check drainage The water outlet is restricted. There might be water in the
wash cabinet.
Clean the filte
r combination (see "Cleaning and care").
Clean
the drain pump (see "Frequently asked
questions").
Clean the non-return valve (see "Frequently asked
questions").
Remove any kink
or loop in the drain hose.
Fault XXX
(XXX stands for a number)
There may be a technical fault.
After a 10 seconds:
T
urn the dishwasher back on.
Selec
t the desired program.
P
ress the Start/Stop button.
If the err
or message is displayed again, there is a technical
fault.
Contact Miele Service.
The waterproof system has reacted.
Close the faucet.
Contact Mie
le Service.
Loading ...
Loading ...
Loading ...