Loading ...
Loading ...
Loading ...
Electrical connection
109
Electrical connection
All electrical work must be carried out by a suitably qualified
electrician in
accordance with local and national safety regulations.
– The plug connection must comply with national regulations. (The
electrical
outlet must be accessible after the appliance has been
installed.)
– If the appliance is hard wired, a multiple-pole circuit breaker must
be
used. The circuit breaker must have a contact opening width of
at least 3 mm and be lockable in open position.
– To increase safety, it is recommended that the machine be
connecte
d to a ground fault circuit breaker with a tip current of 30
mA.
– If necessary, equipotential bonding must be carried out.
– The power cord may only be replaced by an original Miele part.
– For technical data, see the data plate or the attached wiring
di
agram!
The appliance must only be operated with the voltage, frequency, and
fuse rating
shown on the data plate.
This appliance can be con
ve
rted to a different type of power
supply in accordance with the conversion diagram and wiring
diagram supplied.
The conversion diagram and the da
ta plate are supplied with the
appliance.
The ground lead must be connected to the screw connection point
(marked with the gr
ound symbol ) at the back of the machine.
WARNING
THIS APPLIA
NCE MUST BE GROUNDED
Grounding
connection
Loading ...
Loading ...
Loading ...