User Manual - Page 82

For ATECA 2021.

Loading ...
Loading ...
Loading ...
Operation
services without engine oil change (e
.g. In-
spection).
In vehicles with Services established by
time or mileage, the service intervals are al-
ready pre-defined.
In vehicles with LongLife Service, the inter-
vals are determined individually. Thanks to
technological progress, maintenance work
has been greatly reduced. Because of the
technology used by SEAT, with this service
you only need to change the oil when the ve-
hicle so requires. To calculate this variation
(max. 2 years), the vehicle's conditions of use
and individual driving styles are considered.
The advance warning first appears 20 days
before the date established for the corre-
sponding service. The kilometres (miles) re-
maining until the next service are always
rounded up to the nearest 100 km (miles) and
the time is given in complete days. The cur-
rent service message cannot be viewed until
500 km after the last service. Prior to this, on-
ly lines are visible on the display.
Inspection reminder
If a service or an inspection has to be carried
out soon, a service reminder will be dis-
played when the ignition is switched on.
The figure displayed are the kilometres that
can still be travelled or the time until the next
service.
Service due
When the time for a service or an inspec-
tion comes, an audible warning will be emit-
ted when the ignition is switched on and the
fixed key symbol may appear on the in-
strument panel for a few seconds, along with
one of the following messages:
Service now!
Please have your vehicle inspec-
ted.
Oil change service due!
Oil change service and inspection
due!
Consult a service notification
With the ignition switched on, the engine off
and the vehicle at a standstill, the current
service notification can be read:
Check the date of the current service on the
infotainment system
Press the function button Data > Set-
tings > Service; OR > Vehicle sta-
tus
page 85.
Select the Service menu option to display
information about the services.
Vehicles with analogue instrument panel
Press and hold the button 
Fig. 54
4
for more than 5 seconds to con-
sult the service message
Vehicles with digital instrument panel
The date of the service can only be read
thr
ough the Service menu
page 70.
Resetting service interval display
If the service was not carried out by a SEAT
dealership, the display can be reset as fol-
lows:
Vehicles with analogue instrument panel
Switch off the ignition, press and hold but-
ton 
Fig. 54
4
.
Switch ignition back on.
Release the  button and press it
again f
or the next 20 seconds.
Vehicles with digital instrument panel
The service interval display can only be re-
set through the Service menu
page 70.
Do not restart the indicator between the
service intervals, otherwise the information
displayed will be incorrect.
If the oil change service is reset manually, the
service interval display changes to a fixed
service interval, also in vehicles with Flexible
oil change service.
Note
The service message disappears aft
er a
few seconds, when the engine is started or
when  button is pressed on the wiper
80
Loading ...
Loading ...
Loading ...