Loading ...
Loading ...
Loading ...
Braking and parking
Note
●
In v
ehicles with a manual gearbox, re-
leasing the clutch and accelerating at the
same time automatically disconnects the
electronic parking brake.
●
If the 12-volt vehicle battery is flat, it will
not be possible to switch off the electronic
parking brake. Use the jump-start
›››
page 50.
●
When the electronic parking brake is ap-
plied or released, noises may be heard.
●
The system performs automatic and au-
dible tests sporadically in the parked vehi-
cle if some time elapses without the elec-
tronic parking brake being used.
Auto Hold Function
3 Not v
alid for the 1.4L 110 kW engine with 8-
speed automatic transmission
Fig. 183
In the lower part of the centre con-
sol
e: Auto Hold function button.
The
›
››
Fig. 183 button's indicator lamp re-
mains on while the Auto Hold function is
switched on.
Once connected, the Auto Hold function as-
sists the driver in keeping the vehicle station-
ary at repeated intervals or for a certain peri-
od of time with the engine running, for exam-
ple, when going up a slope, when stopped at
traffic lights or in heavy traffic with intermit-
tent stops.
When connected, the Auto Hold function au-
tomatically prevents the vehicle from rolling
when stationary without pressing the brake
pedal.
After detecting that the vehicle is stationary
and the brake pedal has been released, the
Auto Hold function holds the vehicle. The driv-
er can lift their foot off the brake pedal.
When the driver touches the accelerator
pedal or accelerates slightly to continue driv-
ing, the Auto Hold function releases the brake.
The vehicle moves according to the slope of
the road.
If the vehicle is stationary and one of the con-
ditions required by the Auto Hold function is
impaired, it disconnects itself and the button's
control light goes out
›››
Fig. 183. The elec-
tronic parking brake connects automatically,
if necessary, to park the vehicle safely
›››
.
Conditions f
or keeping the vehicle station-
ary with the Auto Hold function
●
The driver door must be closed.
●
The driver's seat belt must be fastened.
●
The engine is running.
Switching the Auto Hold function on and
off
Press the
›››
button. The control lamp on
the butt
on goes out when the Auto Hold func-
tion is switched off.
»
261
Loading ...
Loading ...
Loading ...