Loading ...
Loading ...
Loading ...
Air conditioning
The supplementary heating system switches
off again aut
omatically after a while.
Note
●
Noises will be hear
d while the auxiliary
heater is running.
●
When the air humidity is high and the in-
side temperature low, condensation from
the heating and ventilating system may
evaporate when the auxiliary heater is
switched on. In this case, steam may be re-
leased from underneath the vehicle. This
does not mean that there is a vehicle mal-
function.
●
If the vehicle is tilted, e.g. if parked on a
slope, the operation of the auxiliary heater
may be restricted if the fuel tank level is
low (just above the reserve level).
●
If the auxiliary heater is used a number of
times for a long period of time, the 12-volt
battery will lose its charge. To recharge the
battery, the vehicle must be driven for a
number of kilometres from time to time. As
a guideline: the journey should last approx-
imately as long as the heater was connec-
ted.
●
At temperatures below +5 °C (+41 °F), the
auxiliary heater may switch itself on auto-
matically when the engine is switched on.
The auxiliary heater is switched off again
after a certain time.
●
While the vehicle is stopped, the auxiliary
heating can be switched on up to a maxi-
mum of three consecutive times in a row
with the maximum oper
ating duration.
Programming the auxiliary heater
Before pr
ogramming it, check that the vehi-
cle's date and time are set correctly
›››
.
The auxiliary heat
er is programmed in the
Auxiliary heater menu of the infotainment
system.
Set the operating duration of the auxiliary
heating
●
Open the Auxiliary heater menu.
●
Press the Set function butt
on.
●
To set the operating time, press the Oper-
ating duration button.
The set operating duration is taken into ac-
count when the auxiliary heating is switched
on using the immediate heat button or the
remote control.
The maximum duration of the auxiliary heat-
ing is 60 minutes.
Set the departure time
Activating this function only affects the heat-
ing or ventilation. The departure time must be
reactivated whenever the vehicle is started.
●
Open the Auxiliary heater menu.
●
Press the Set function button.
●
Select one of the memory spaces for a De-
parture time.
●
Press the Activate function button.
Manual air conditioning: The scheduled de-
parture time determines when the auxiliary
heating or ventilation will be switched off. The
start of the heating or ventilation process de-
pends on the programmed duration of opera-
tion.
Climatronic: The vehicle uses the program-
med departure time to automatically calcu-
late the time at which the heating or ventila-
tion process should begin to attain the set
temperature.
A departure time can be scheduled in the App
or on the MySEAT website.
Checking the programming
If a departure time is activated, the yellow
LED on the immediate heat button lights up
on the Climatronic control panel, approxi-
mately ten seconds after the ignition is
switched off.
WARNING
Never programme the auxiliary heater so
that it s
witches itself on and is running in an
enclosed space or an area with no ventila-
tion. The auxiliary heater exhaust fumes
contain carbon monoxide, an odourless
»
157
Loading ...
Loading ...
Loading ...