Loading ...
Loading ...
Loading ...
Help with parking and manoeuvring
way, the system will require fewer manoeu-
vr
es to complete the parking action.
Trailer mode
The Park Assist system cannot be switched
on if the factory-fitted towing bracket
›››
page 288 is electrically connected to a
trailer.
After changing a wheel
If, after changing a wheel, the vehicle stops
entering and exiting parking spaces correct-
ly, the circumference of the new wheel may
be different and the system may need to
adapt to it. The adaptation is automatic and
takes place during driving. Making turns slow-
ly and in both directions (20 km/h [12 mph])
for a few minutes may contribute to this
adaptation process
›››
in Introduction on
page 266.
Selecting a parking mode
Fig. 185
On the instrument panel display: view
of the parking assist syst
em with reduced view.
Fig. 186 On the instrument panel display: indi-
cation of parking modes.
Parking assist has the following 3 parking
modes:
Reverse parallel parking.
R
everse angle parking.
Forward angle parking.
Selecting a parking mode after passing in
front of the space
After activating the Park Assist system and af-
ter detecting a parking space, the display on
the instrument panel proposes a parking
mode. The Park Assist system selects the
parking mode automatically. The selected
mode is shown on the instrument panel dis-
play
›››
Fig. 185. The reduced display of other
possible parking modes is also shown
›››
Fig. 186. If the mode selected by the sys-
tem does not correspond to the desired
mode, you can select another mode by
pressing the button
›››
Fig. 184.
●
The necessary conditions to park with Park
Assist have to be met
›››
page 268.
●
Press the button.
●
A control lamp on the button lights up
when the system is switched on. Additionally,
the selected parking mode is shown on the
instrument panel display and the reduced
display shows another parking mode it can
be changed to.
●
Turn on the corresponding turn signal to-
wards the side of the road where you are
parking. The instrument panel displays the
side corresponding to the road. By default, if
»
269
Loading ...
Loading ...
Loading ...