Loading ...
Loading ...
Loading ...
Driver assistance systems
●
The l
amp flashes in the corresponding rear-
view mirror even though the turn signal has
not been activated.
●
The steering wheel vibrates to warn the
driver of the risk of collision.
●
torque is applied to correct the steering
and return the vehicle to its lane.
Driving situations
Fig. 179
Schematic representation: P
assing
situation with traffic behind the vehicle. Indi-
cation from the blind spot detector in the left-
hand external mirror.
Fig. 180
Schematic representation:
Sit
ua-
tion of passing and then moving into the right-
hand lane.
Indication from the blind spot de-
tector in the right-hand external mirror.
In the following situations, an indication will
be displ
ayed in the external mirror
›››
Fig. 179
(arrow) or
›››
Fig. 180 (arrow):
●
When being overtaken by another vehicle
›››
Fig. 179
.
●
When passing another vehicle
›››
Fig. 180
with a speed differential of approx. 10 km/h
(6 mph). If the vehicle is passing at a consid-
erably higher speed, no indication will be dis-
played.
The faster a vehicle approaches, the sooner
an indication will be displayed in the exterior
mirror, because Side Assist takes into account
the different in speed compared to other ve-
hicles. Thus even though the distance from
the other vehicle is identical, the indication
will appear sooner in some cases and later in
others.
Physical limitations inherent to the system
In some situations the lane departure warning
may not interpret the traffic situation correct-
ly. I.e. in the following situations:
●
on tight bends;
●
in the case of lanes with different widths;
●
in areas with significant gradient changes;
●
in adverse weather conditions;
●
in the case of special constructions to the
side of the vehicle, e.g., high or irregular divid-
ers.
255
Loading ...
Loading ...
Loading ...