User Manual - Page 28

For RQ48T9432T1.

Loading ...
Loading ...
Loading ...
Installation
English28
Installation
STEP 4 Leveling the refrigerator
CAUTION
When installed, the refrigerator must be leveled on a at, solid oor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
Leveling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
For safety reasons, adjust the front a little higher than the rear.
If the rear side of the refrigerator is not level, place a solid object on the lower side and
x it with tape to level.
When you push the product into the nal installation location, be careful not to damage
the oor.
If the refrigerator is not installed on a at
oor, the doors may not be aligned.
Levelling legs are located on the
left and right side under the bottom
compartment door.
1. Fully open the bottom compartment
door, and then use a Phillips screwdriver
to remove the two screws on each of the
levelling leg cover.
Untitled-3 28 2020-11-12  4:05:56
Loading ...
Loading ...
Loading ...