Dji ROBOMASTER EP CORE User Manual

Loading ...

ROBOMASTER EP Core User Manual

Firmware Update

Check the robot rmware version in Settings, then System, and then Firmware Update. If there is a

new rmware version, use the RoboMaster app to update the rmware of the robot.

1. Make sure that all parts are connected, power on the robot, and check to make sure the battery

level is above 50%.

2. Tap App, then System, and then Firmware Update. Follow the onscreen instructions to update the

rmware. Make sure the mobile device is connected to the internet when downloading the rmware.

3. The robot tracks the progress of the update using audio prompts. Wait until the update is

complete.

The battery rmware is included in the robot rmware. Make sure to update the rmware of

all batteries if you have several.

Only start a rmware update if the battery level is above 50%.

Note that while updating the rmware, the status indicators may blink abnormally, and the

robot may reboot.

The robot and app may disconnect after updating. If this occurs, reconnect them.

If you receive a prompt that newer rmware version is out of date, update and try again.

When in Battle mode, make sure that all the robots are using the same rmware version.

Loading ...

Dji ROBOMASTER EP CORE Educational Robot