Loading ...
Loading ...
Loading ...
©
2020 DJI All Rights Reserved.
43
ROBOMASTER EP Core User Manual
Front Axle Extension Platform
The front axle extension platform can be xed to the front of the chassis so that a gripper or sensor
can be installed. Below shows the installation procedure for the gripper.
1. Use four M3-C screws to fix the gripper to the specific position on the front axle extension
platform as shown below.
2. Use four M3-C screws to x the front axle extension platform to the front of the chassis as shown
below.
Extension Building Block
The robot is compatible with third-party building blocks. Below is an introduction on how to mount
building rods to the robot.
As shown below, use four M3-B screws to x the building rods to the chassis extension platform.
More building blocks can then be added to the robot.
Loading ...
Loading ...
Loading ...