Loading ...
Loading ...
Loading ...
© 2017 DJI All Rights Reserved.
53
AGRAS MG-1S User Manual
Rapidly Blinking Yellow Remote controller signal lost
Slowly Blinking Red Low battery level
Rapidly Blinking Red Critical low battery level
Solid Green
System Data Protection function working
Upgrading the Firmware
Aircraft Firmware
Connect the Micro USB port of the aircraft to DJI Assistant 2 on your computer to update the
aircraft rmware. Refer to the DJI Assistant 2 (p. 48) section for details.
Remote Controller Firmware
Power on the remote controller and update the remote controller rmware in the DJI MG app.
1. Enter Operation View > System Status bar > Aircraft Status List to check the current rmware
version. Follow the instructions in the DJI MG app to nish the update if there is a new version.
2. The Status LED will turn solid green when the update is successful. The LED will turn solid red if
the update fails. Restart the remote controller and try again.
The rmware update process takes approximately 10 minutes. We recommend nding a
comfortable environment to carry out the update.
Both the remote controller and aircraft rmware must be up-to-date, or else they will not
link.
Check the DJI MG app that you have the latest rmware installed before every ight.
The rmware update requires an internet connection. Connect the display device to a Wi-
Fi network whenever possible.
Wait for the progress bar to reach 100% to ensure that the rmware update is complete.
The remote controller status indicator glows solid blue during the update.
DO NOT power off the remote controller during the update.
DO NOT perform the rmware update while the aircraft is in the air. Only carry out the
rmware update when the aircraft is on the ground.
The remote controller may become unlinked from the aircraft after the rmware update.
Relink the remote controller and aircraft if necessary.
Loading ...