Loading ...
Loading ...
Loading ...
24
© 2017 DJI All Rights Reserved.
AGRAS MG-1S User Manual
The table below is a summary for how to control the spraying system via the remote controller in
different modes.
Mode
Spray
Rate Dial
Spray
Button
Settings
Dial
C1 Button C2 Button C3 Button C4 Button
Smart
operation
mode
/ /
Adjust work
efciency
Press simultaneously to y to the
next turning point and hover.
Press and hold simultaneously
for 2-4 seconds and the remote
controller will beep to enter or quit
Continuous Smart operation mode.
/ /
Manual
operation
mode
Adjust
spray rate
Start
or stop
spraying
/
Choose operation
route L for Smart
Operation mode
Choose
operation route
R for Smart
Operation mode
Spray with
only the
two front
sprinklers
Spray with
only the
two back
sprinklers
Manual
Plus
operation
mode
Adjust
maximum
spray rate
/
Adjust
maximum
ying speed
Fly the aircraft one
line spacing to the
left
Fly the aircraft
one line spacing
to the right
/ /
F-mode / /
Adjust work
efciency
/ / / /
Field
Plan
/ / /
Start or end
obstacle
measurement
Add a waypoint.
Add the
calibration
point
/
RTH Button
Press and hold the RTH button to bring the aircraft back to the last recorded Home Point. The LED
around the RTH Button will blink white during RTH procedure. During ascent and descent, users
can control all aircraft movement. Users can control aircraft heading while it ies to the Home Point.
Press this button again to cancel RTH and regain control of the aircraft.
8. C3 Button
In Manual Mode, press to spray liquid with the two front sprinklers only.
During Field Plan, walk to the desired calibration point and press to add the point.
9. C4 Button
In Manual mode, press to spray liquid with the two back sprinklers only.
Loading ...
Loading ...
Loading ...