Loading ...
Loading ...
Loading ...
© 2017 DJI All Rights Reserved.
23
AGRAS MG-1S User Manual
1. Spray Rate Dial
In Manual or Manual Plus operation mode, turn left to reduce and right to increase the spray rate
1
.
The DJI MG app will indicate the current spray rate.
2. Spray Button
In Manual operation mode, press to start or stop spraying.
3. A Button
Press to record Point A of the Smart operation route.
4. B Button
Press to record Point B after recording Point A.
5. Settings Dial
In Smart operation mode or F-mode, turn to adjust work efciency, including ying speed and
spray rate.
6. C1 Button
In Smart operation mode, press to choose operation route L, after recording Point A and B.
In Manual Plus operation mode, press to y the aircraft one line spacing to the left.
During Field Plan
2
press to start or end obstacle measurement if you want to mark an obstacle in
the operating area.
7. C2 Button
In Smart operation mode, press to choose operation route R, after recording Point A and B.
In Manual Plus operation mode, press to y the aircraft one line spacing to the right.
During Field Plan, walk along the operating area or obstacle and press to add a waypoint.
In Smart operation mode, when the aircraft is hovering at a turning point, press the C1 and C2
buttons simultaneously to y to the next turning point and hover. Press and hold the C1 and C2
buttons simultaneously for 2 to 4 seconds and the remote controller will beep to enter or quit
Continuous Smart operation mode. Refer to Smart Operation Mode (p. 32) for more details.
1
Spray rate may vary according to the nozzle model and viscosity of the liquid. When using water, four
XR11001 nozzles spray at a minimum rate of 1.2 L/min, and maximum 1.8 L/min.
2
When the remote controller is not connected to the aircraft, “Field Plan” will display on the DJI MG main
interface. Tap the C1 button to enter Operation View for route planning. Refer to Intelligent Operation
Planning System (p. 30) for details.
1
5
2 4
3
7
9
8
6
Loading ...
Loading ...
Loading ...