Dji AGRAS MG-1S SERIES User Manual

Loading ...

AGRAS MG-1S User Manual

8. The aircraft automatically sprays liquid and calibrates the ow meter.

9. The DJI MG app will display that calibration is complete. You may now begin regular operation.

During calibration, tap > to cancel. The accuracy of the ow meter will be the data

before calibration.

If you exit calibration before it is complete, data protection and operation resumption

function are still available. Calibration will continue after resuming operation.

When to Recalibrate

1. Installing a different nozzle model. Note: choose the corresponding model in the DJI MG app

after replacing nozzles. Go to Operation View > > for conguration.

2. Using a liquid of a different viscosity.

3. The error between the actual value and the theoretical value of the completed area is more than

15%.

Starting and Stopping the Motors

Starting the Motors

The Combination Stick Command (CSC) listed below is used to start and stop the motors. Ensure

you perform the CSC in one continuous motion. The motors will begin to accelerate to an idle

speed. Release both sticks simultaneously. Take off immediately after the motors are spinning, or

else the aircraft may lose balance, drift, or even takeoff by itself and risk damage or harm.

Stopping the Motors

There are two methods to stop the motors.

1. When the aircraft has landed, push the throttle down and hold. The motors will stop after three

seconds.

Throttle Stick

2. When the aircraft has landed, push the throttle stick down, then perform the CSC command to

stop the motors. Release both sticks once the motors have stopped.

Loading ...

Dji AGRAS MG-1S SERIES