Dji AGRAS MG-1S SERIES User Manual

Loading ...

AGRAS MG-1S User Manual

Remote Controller LEDs

The Status LED indicates the connection status between the remote controller and the aircraft. The

RTH Status LED indicates the Return to Home status of the aircraft. See the table below for details

on these indicators:

Status LED Sound Remote Controller Status

—

Solid Red chime

The remote controller is not connected to

the aircraft.

—

Solid Green chime

The remote controller is connected to the

aircraft.

Blinks Red Repeating slow beep Remote controller error.

RTH Status LED Sound Aircraft Status

—

Solid White chime Return to Home procedure is initiated.

Blinking white Repeating single beep

Sending Return to Home command to the

aircraft.

Blinking white Repeating double beep The aircraft is returning to the Home Point.

返航提示灯

状态指示灯

Optimal Transmission Range

Strong Weak

Signal transmission between the aircraft and remote controller performs best when the aircraft

is within optimal transmission range. Unfold the antennas on the remote controller to optimize

transmission range. Ideally, the flat surface of the antennas should be facing the aircraft. If the

signal is weak, y the aircraft closer to you.

Loading ...

Dji AGRAS MG-1S SERIES