Loading ...
Loading ...
Loading ...
Delete a stored job
When a new job is stored on a USB ash drive, any previous jobs with the same user and job name are
overwritten. If the memory on the USB ash drive is full, the following message displays on the printer control
panel: The USB ash storage device is out of memory. Delete unused jobs, and then try again. Existing stored
jobs must be deleted before additional print jobs can be stored.
●
Delete a job that is stored on the printer
Delete a job that is stored on the printer
Delete a job that is stored on a USB ash drive.
1. On the printer control panel, press the OK button to display the Home screen.
2. Use the arrow buttons to navigate to Job Storage, and then press the OK button again.
3. From the Job Folders list, navigate to and select the name of the folder where the job is stored, and then
press OK.
4. Navigate to and select the name of the job that you want to delete, and press OK.
If the job is private or encrypted, enter the PIN or password.
5. Use the arrow buttons to navigate to the Delete option and then press the OK button. Press OK again to
delete the job.
Information sent to printer for Job Accounting purposes
Printing jobs sent from drivers on the client (e.g., PC) may send personally identiable information to HP’s
Printing and Imaging devices. This information may include, but is not limited to, user name and client name
from which the job originated that may be used for job accounting purposes, as determined by the Administrator
of the printing device. This same information may also be stored with the job on the mass storage device (e.g.,
disk drive) of the printing device when using the job storage feature.
ENWW Store print jobs on the printer to print later or print privately 57
Loading ...
Loading ...
Loading ...