Loading ...
Loading ...
Loading ...
BASIC EMBROIDERY
91
2
Embroidering from the beginning or middle
of the pattern
If you wish to restart embroidering from the beginning, for
example, if trial embroidery was performed and an incorrect
thread tension was used or if the wrong thread color was
used, restart the embroidering using the forward/backward
stitch key. In addition, you can go forward or back through
the stitching by thread color or by stitch to start stitching at
any position of the pattern.
a
Press the “Start/Stop” button to stop the machine.
• If necessary, trim and remove the embroidered
stitches.
b
Touch .
The stitch navigating screen appears.
c
Use the scroll bar to select the thread color, and then
touch , , , , , , and
to select the specific stitch.
• Touch to embroider from the beginning.
1 Touch this key to cancel the changes and return to the
point in the stitching before the changes.
2 The stitch from where embroidering is to begin can also
be specified by using the scroll bar.
3 The thread color at the top of the thread color sequence
display is the color of the area currently selected.
Touch this area to specify the stitch from where
embroidering is to begin.
The needle bar case moves and the current needle
bar moves to the embroidering position, and then the
embroidery frame moves and current needle position
is indicated.
d
After selecting the stitch from where embroidering is
to begin, touch .
The embroidering screen appears again.
e
Touch , and then press the “Start/Stop”
button to begin embroidering.
Embroidering begins from the specified point.
■ Specifying a stitch number
a
Touch .
b
Use the number keys to enter the desired stitch
number, and then touch .
The embroidery frame moves to the specified stitch.
c
Touch .
The embroidering screen appears again.
d
Touch , and then press the “Start/Stop”
button to continue embroidering.
Note
• Be careful when going back or forward through the
stitching since the embroidery frame moves at the
same time.
3
2
1
Loading ...
Loading ...
Loading ...